Features
● Heavy one-piece steel frame, minimizing deflection, high accuracy.
● OMPI pneumatic dry clutch brake,longer service life.
● 6 points slide guiding, Adopt Quenching & Grinding Process for Slide-Guide,which can make the press machine higher accuracy & low wear and provide increased tool life.
● Forged 42CrMo alloy material crankshaft, its strength is 1.3 times higher than that of #45 steel, and service life is longer.
● Copper sleeve is made of tin phosphorus bronze ZQSn10-1, which has a strength 1.5 times higher than that of ordinary BC6 brass.
● Highly sensitive hydraulic overload protection device,effectively protect the service life of the presses and tools.
● Built to JIS Class I accuracy standard.
● Optional Die Cushion.
Specifications
Technical parameter
Specifications | Unit | ST-35 | |
Mode | V-type | H-type | |
Press capacity | Ton | 35 | |
Rated tonnage point | mm | 3.2 | 1.6 |
Slide strokes per minute | S.P.M | 40~120 | 110~180 |
Slide stroke length | mm | 70 | 40 |
Max die height | mm | 220 | 235 |
Slide adjustment amount | mm | 55 | |
Slide size | mm | 520*250*50 | |
Bolster size | mm | 800*400*70 | |
Slide center to machine distance | mm | 205 | |
Platform to floor distance | mm | 790 | |
Shank hole | mm | Φ38.1 | |
Main motor power | KW*P | 3.7*4 | |
slide adjust device | / | Manual | |
Air pressure | kg*cm² | 6 | |
Press accuracy grade | Grade | JIS 1 | |
Press dimension(L*W*H) | mm | 1380*900*2400 | |
Press weight | Tons | 3 | |
Die cushion capacity | Ton | 2.3 | |
Die cushion stroke | mm | 50 | |
Die cushion active area | mm² | 300*230 | |
NOTE:Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. (If the slide is selected for electric mold adjustment, the parameter will be reduced by 10 mm) |
Standard Configuration
> | Hydraulic overload protection device | > | Air blowing device |
> | Manual slider adjustment device (below ST60) | > | Mechanical shockproof feet |
> | Electric slider adjusting device (above ST80) | > | Mis-feeding detection device reserved interface |
> | Variable frequency variable speed motor (adjustable speed) | > | Maintenance tools and toolbox |
> | Mechanical die height indicator (below ST60) | > | Main motor reversing device |
> | Digital die height indicator (above ST80) | > | Light Curtain (Safety Guarding) |
> | Slider and stamping tools balance device | > | Power outlet |
> | Rotating cam controller | > | Electric grease lubrication device |
> | Crankshaft angle indicator | > | Touch screen (pre-break, pre-load) |
> | Electromagnetic counter | > | Fixed two-handed operating console |
> | Air source connector | > | LED die lighting |
> | Second degree falling protecting device |
Optional Configuration
> | Customization Per Customer Requirement | > | T-type movable two handed console |
> | Die Cushion | > | Re-Circulating Oil lubrication(Above ST-80) |
> | ST-60 die height electric adjusting device | > | Wet clutch |
> | Quick Die Change System | > | Anti-Vibration Isolator |
> | Slide knock out device | > | Tonnage Monitor |
> | Turnkey System with Coil Feedline and Automation System |
● Heavy one-piece steel frame,minimizing deflection,high accuracy.
● OMPI pneumatic dry clutch brake,longer service life.
● 6 points slide guiding,Adopt Quenching&Grinding Process for Slide-Guide,which can make the press machine higher accuracy & low wear and provide increased tool life.
● Forged 42CrMo alloy meaterial crankshaft, its strength is 1.3 times higher than that of #45 steel, and service life is longer.
● Copper sleeve is made of tin phosphorus bronze ZQSn10-1, which has a strength 1.5 times higher than that of ordinary BC6 brass.
● Highly sensitive hydraulic overload protection device,effectively protect the service life of the presses and tools.
● Built to JIS Class I accuracy standard.
● Optional Die Cushion.
Standard Confirguration
> | Hydraulic overload protection device | > | Air blowing device |
> | Manual slider adjustment device (below ST60) | > | Mechanical shockproof feet |
> | Electric slider adjusting device (above ST80) | > | Mis-feeding detection device reserved interface |
> | Variable frequency variable speed motor (adjustable speed) | > | Maintenance tools and toolbox |
> | Mechanical die height indicator (below ST60) | > | Main motor reversing device |
> | Digital die height indicator (above ST80) | > | Light Curtain (Safety Guarding) |
> | Slider and stamping tools balance device | > | Power outlet |
> | Rotating cam controller | > | Electric grease lubrication device |
> | Crankshaft angle indicator | > | Touch screen (pre-break, pre-load) |
> | Electromagnetic counter | > | Fixed two-handed operating console |
> | Air source connector | > | LED die lighting |
> | Second degree falling protecting device |
Optional Configuration
> | Customization Per Customer Requirement | > | T-type movable two handed console |
> | Die Cushion | > | Re-Circulating Oil lubrication(Above ST-80) |
> | ST-60 die height electric adjusting device | > | Wet clutch |
> | Quick Die Change System | > | Anti-Vibration Isolator |
> | Slide knock out device | > | Tonnage Monitor |
> | Turnkey System with Coil Feedline and Automation System |