Product Introduction
QIAOSEN mechanical servo press machine are suitable for household appliances，consumable electronics and auto parts sheet metal stamping, forming, blanking. By combining progressive die with pendulum curve, which can require perfect forming and the productivity can possibly be doubled, saves more than 50% of energy.
STC servo series are gap frame servo presses, adopted 15.6 inches touch screen. Built in with 9 motion curve processing modes, automated transfer production line can also be added to upgrade the productivity.
Powerful direct servp drive transmission. Low speed and high torque can be provided.
Servo press can also meet the requirements of toggle joint press machine and multi link press machine. Compared to these two types of mechanical press structures, servo press can meet more stamping process requirements, features a extreme acceleration/ deceleration, and has more energy-saving and efficient characteristics.
Specifications
Technical parameter
| Specifications | Unit | STC-110sv | STC-160sv | STC-200sv | STC-250sv | STC-315sv |
| Press capacity | Ton | 110 | 160 | 200 | 250 | 315 |
| Impact force location | mm | 4 | 5 | 5 | 5.5 | 6 |
| Slider strokes per minute（S.P.M) | Swing mode | ~100 | ~100 | ~95 | ~70 | ~65 |
| Slider strokes per minute（S.P.M) | Full stroke | ~50 | ~50 | ~50 | ~40 | ~40 |
| Slider stroke length | mm | 180 | 200 | 250 | 280 | 280 |
| Max mold height | mm | 400 | 450 | 500 | 550 | 550 |
| Slider adjustment amount | mm | 100 | 100 | 120 | 120 | 120 |
| Slide size | mm | 1400*500*70 | 1600*550*70 | 1850*650*95 | 2100*700*95 | 2200*700*95 |
| Bolster platform size | mm | 1800*650*130 | 2000*760*150 | 2400*840*170 | 2700*900*170 | 2800*900*190 |
| Main servo motor torque | Nm | 5000 | 9000 | 12500 | 16000 | 20500 |
| Air pressure | kg*cm² | 6 | 6 | 6 | 6 | 6 |
| Press accuracy grade | Grade | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 |
| Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. | ||||||
● Heavy one-piece steel frame, minimizing deflection, high accuracy.
● High strength body structure, small deformation and high precision
● The sliding block adopts double angle hexahedral guide rail, and the sliding block guide rail adopts “high-frequency quenching” and “rail grinding process”: low wear, high precision, long precision holding time, and improves the service life of the mold.
● The crankshaft is made of high-strength alloy material 42CrMo. Its strength is 1.3 times that of 45 steel and its service life is longer.
● The copper sleeve is made of tin phosphor bronze ZQSn10-1, and its strength is 1.5 times that of ordinary BC6 brass.
● The use of highly sensitive hydraulic overload protection device can effectively protect the service life of the punching presses and die.
● The standard configuration is high-precision bearing and Japanese NOK seal.
● 15.6 inch touch screen
● Optional Die Cushion.
● 9 processing modes are built-in, and each product can select the processing curve most suitable for component processing, so as to achieve high precision, high efficiency and high energy conservation.
● Compared with traditional presses, it has simple structure, high mechanical transmission efficiency and low maintenance cost.
● According to the characteristics of products/materials, the stamping forming speed can be reduced during the material processing to achieve the best forming speed of products/materials. Thus reducing vibration and stamping noise; Improve product accuracy and extend the service life of the mold.
● According to different products, different heights are required. The stroke of the punch can be set arbitrarily, which greatly shortens the stamping time and improves the efficient.
Standard Confirguration
| > | Hydraulic overload protection device | > | Air blowing device |
| > | Servo Motor（Speed Adjustable) | > | Mechanical shockproof feet |
| > | Electric slider adjusting device | > | Mis-feeding detection device reserved interface |
| > | Independent control cabinet | > | Maintenance tools and toolbox |
| > | Prejudging counter | > | Main motor reversing device |
| > | Digital die height indicator | > | Light Curtain (Safety Guarding) |
| > | Slider and stamping tools balance device | > | Power outlet |
| > | Rotating cam controller | > | Electric grease lubrication device |
| > | Crankshaft angle indicator | > | Touch screen (pre-break, pre-load) |
| > | Electromagnetic counter | > | Movable two-handed operating console |
| > | Air source connector | > | LED die lighting |
| > | Second degree falling protecting device | Air cooled chiller |
Optional Configuration
| > | Customization Per Customer Requirement | > | Fixed two handed console |
| > | Die Cushion | > | Re-Circulating Oil lubrication |
| > | Turnkey System with Coil Feedline and Automation System | > | |
| > | Quick Die Change System | > | Anti-Vibration Isolator |
| > | Slide knock out device | > | Tonnage Monitor |
