• facebook
  • linkedin
  • instagram
  • youtube

PRESS BUILDER

PROVIDE PROFESSIONAL METALFORMING SOLUTIONS

C-Frame High Speed Press Machine

Short Description:

STS-Series: 16~85 Tons

STS series is QIAOSEN C-Frame High Speed Press Machine,it’s designed for stamping production of electronic components and electronic connection terminals.


Product Detail

Features

Standard / Optional

VIEW VIDEOS

25~315 Ton

Product Introduction

STS series presses are produce by Qiaosen presses, which built to meet or exceed JIS Class 1 accuracy standards . The frame of the machine is made of high-strength cast iron, which is most suitable for continuous punching and forming production because of its stable material and constant precision after internal stress relief. which can make the press machine have minimizing deflection and high accuracy and provide increased tool life.

Specifications

Technical parameter

Name Unit STS-16T STS-25T STS-45T STS-60T STS-65T STS-85T
Press capacity Ton 16 25 45 60 65 85
Slide stroke length mm 20 30 20 30 25 30 30 40 30 40 30 40
Slide strokes per minute S.P.M 200-900 200-700 200-900 200-800 200-800 200-700 200-700 200-600 200-700 200-600 200-800 200-700
Die height mm 185-215 180-210 185-215 180-210 213-243 210-240 215-255 210-250 215-265 210-260 315-365 310-360
Slide adjustment amount  mm 30 30 30 40 50 50
Bolster size mm 430*280*70 600*300*80 680*455*90 890*540*110 890*580*130 1100*680*120
Slide size mm 300*185 320*220 420*320 600*400 600*400 900*450
Blank-holding hole mm 90*250*330 100*300*400 100*400*500 120*450*600 150*450*550 150*680*820
Main motor kw 3.7 3.7 5.5 7.5 11 18.5
NOTE:Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice.

  • Previous:
  • Next:

  • ● The frame of the machine is made of high-strength cast iron, which is most suitable for continuous punching production because of its stable material and constant precision after internal stress relief.

    ● The structure of double guide pillars and one central pillar is adopted. The copper sleeve with special alloy is used to replace the traditional sliding plate structure, so that the dynamic friction is reduced to the minimum. The forced lubrication is used to minimize the thermal deformation and achieve the highest accuracy.

    ● Optional anti side dynamic balancing device can reduce vibration, so that the press has the best accuracy and stability.

    ● Die height adjustment, with mold height display and oil pressure locking device, is convenient for mold adjustment operation.

    ● The man-machine interface is controlled by microcomputer, and the numerical value and fault monitoring system are displayed on the screen, which is convenient for operation.

    Standard Confirguration

    > Die height display > Batch control of a group
    >  Inching function > Automatic stop device for punching machine without material
    > Single action function > Lubricating oil circulation function
    > Continuous motion function >  Air cushion feet
    > Peak Stop function > Toolbox
    > Emergency stop function > Dynamic balance
    > Max/min speed limit function > Accumulated counting function
    > Abnormal air pressure function > Oil pressure locking mold
    > Abnormal lubrication oil pressure function > LED die lighting

    Optional Configuration

    > Roller feeder > Double  point lowest point monitor
    > Clamp feeder (single/double) > Electric die height adjustment function
    > Gear feeder  > One sided two handed material receiving machine
    > Electronic disc racker > Single point lowest point monitor

    25 Ton Presses

    35 Ton Presses

    45 Ton Presses

    60 Ton Presses

    80 Ton Presses

    110 Ton Presses

    160 Ton Presses

    200 Ton Presses

    260 Ton Presses

    315 Ton Presses